# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
# Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# @HEADER
#
########################################################################
#
#  Zoltan Toolkit for Load-balancing, Partitioning, Ordering and Coloring
#                  Copyright 2012 Sandia Corporation
#
# Under the terms of Contract DE-AC04-94AL85000 with Sandia Corporation,
# the U.S. Government retains certain rights in this software.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# 3. Neither the name of the Corporation nor the names of the
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY SANDIA CORPORATION "AS IS" AND ANY
# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL SANDIA CORPORATION OR THE
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
# PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Questions? Contact Karen Devine	kddevin@sandia.gov
#                    Erik Boman	        egboman@sandia.gov
#
########################################################################
#
# @HEADER
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
subdir = .
DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.export.zoltan.in $(srcdir)/Makefile.in \
	$(top_srcdir)/configure \
	$(top_srcdir)/src/include/Zoltan_config.h.in config/compile \
	config/config.guess config/config.sub config/depcomp \
	config/install-sh config/missing
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/config/ax_f90_module_case.m4 \
	$(top_srcdir)/config/ax_f90_module_flag.m4 \
	$(top_srcdir)/config/tac_arg_check_mpi.m4 \
	$(top_srcdir)/config/tac_arg_enable_export-makefiles.m4 \
	$(top_srcdir)/config/tac_arg_enable_feature.m4 \
	$(top_srcdir)/config/tac_arg_enable_feature_sub.m4 \
	$(top_srcdir)/config/tac_arg_enable_feature_sub_check.m4 \
	$(top_srcdir)/config/tac_arg_enable_option.m4 \
	$(top_srcdir)/config/tac_arg_with_3pl_sub.m4 \
	$(top_srcdir)/config/tac_arg_with_ar.m4 \
	$(top_srcdir)/config/tac_arg_with_flags.m4 \
	$(top_srcdir)/config/tac_arg_with_incdirs.m4 \
	$(top_srcdir)/config/tac_arg_with_libdirs.m4 \
	$(top_srcdir)/config/tac_arg_with_libs.m4 \
	$(top_srcdir)/config/tac_arg_with_package.m4 \
	$(top_srcdir)/config/tac_arg_with_perl.m4 \
	$(top_srcdir)/config/wk_fc_get_vendor.m4 \
	$(top_srcdir)/config/zac_arg_config_mpi.m4 \
	$(top_srcdir)/config/zac_arg_with_id.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/src/include/Zoltan_config.h
CONFIG_CLEAN_FILES = Makefile.export.zoltan
CONFIG_CLEAN_VPATH_FILES =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-dvi-recursive install-exec-recursive \
	install-html-recursive install-info-recursive \
	install-pdf-recursive install-ps-recursive install-recursive \
	installcheck-recursive installdirs-recursive pdf-recursive \
	ps-recursive uninstall-recursive
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
	distdir dist dist-all distcheck
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = siMPI src example
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  if test -d "$(distdir)"; then \
    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
      && rm -rf "$(distdir)" \
      || { sleep 5 && rm -rf "$(distdir)"; }; \
  else :; fi
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
ALTERNATE_AR = @ALTERNATE_AR@
AMTAR = @AMTAR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EXEEXT = @EXEEXT@
FC = @FC@
FCFLAGS = @FCFLAGS@
FCFLAGS_f = @FCFLAGS_f@
FCFLAGS_f90 = @FCFLAGS_f90@
FCLIBS = @FCLIBS@
FC_MAJOR_VERSION = @FC_MAJOR_VERSION@
FC_MODNAME = @FC_MODNAME@
FC_MODNAME_Q = @FC_MODNAME_Q@
FC_VENDOR = @FC_VENDOR@
FC_VERSION = @FC_VERSION@
FC_VERSION_STRING = @FC_VERSION_STRING@
HAVE_PERL = @HAVE_PERL@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
MPI_CC = @MPI_CC@
MPI_CXX = @MPI_CXX@
MPI_FC = @MPI_FC@
MPI_RECV_LIMIT_FLAG = @MPI_RECV_LIMIT_FLAG@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL_EXE = @PERL_EXE@
RANLIB = @RANLIB@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_aux_dir = @ac_aux_dir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_FC = @ac_ct_FC@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
AUTOMAKE_OPTIONS = foreign
ACLOCAL_AMFLAGS = -I config
ZOLTAN_TESTS = \
    test/test_zoltan \
    test/runtests \
    test/ctest_zoltan.pl \
    test/ch_simple \
    test/hg_simple

ZOLTAN_DOCS = \
    doc/Zoltan_html/Zoltan.html \
    doc/Zoltan_html/Zoltan_FAQ.html \
    doc/Zoltan_html/Zoltan_bugreport.html \
    doc/Zoltan_html/Zoltan_cite.html \
    doc/Zoltan_html/Zoltan_construction.html \
    doc/Zoltan_html/Zoltan_phil.html \
    doc/Zoltan_html/Zoltan_pubs.html \
    doc/Zoltan_html/dev_html/brack3d.png \
    doc/Zoltan_html/dev_html/dev.html \
    doc/Zoltan_html/dev_html/dev_add.html \
    doc/Zoltan_html/dev_html/dev_add_interface.html \
    doc/Zoltan_html/dev_html/dev_add_lb.html \
    doc/Zoltan_html/dev_html/dev_add_memory.html \
    doc/Zoltan_html/dev_html/dev_add_params.html \
    doc/Zoltan_html/dev_html/dev_add_remap.html \
    doc/Zoltan_html/dev_html/dev_add_struct.html \
    doc/Zoltan_html/dev_html/dev_cpp.html \
    doc/Zoltan_html/dev_html/dev_degenerate.html \
    doc/Zoltan_html/dev_html/dev_dist.html \
    doc/Zoltan_html/dev_html/dev_dist_compile.html \
    doc/Zoltan_html/dev_html/dev_dist_cvs.html \
    doc/Zoltan_html/dev_html/dev_dist_dir.html \
    doc/Zoltan_html/dev_html/dev_driver.html \
    doc/Zoltan_html/dev_html/dev_fortran.html \
    doc/Zoltan_html/dev_html/dev_hier.html \
    doc/Zoltan_html/dev_html/dev_hsfc.html \
    doc/Zoltan_html/dev_html/dev_intro.html \
    doc/Zoltan_html/dev_html/dev_intro_coding.html \
    doc/Zoltan_html/dev_html/dev_intro_philosophy.html \
    doc/Zoltan_html/dev_html/dev_intro_sqe.html \
    doc/Zoltan_html/dev_html/dev_lb.html \
    doc/Zoltan_html/dev_html/dev_lb_interface.html \
    doc/Zoltan_html/dev_html/dev_lb_structs.html \
    doc/Zoltan_html/dev_html/dev_lb_types.html \
    doc/Zoltan_html/dev_html/dev_mig.html \
    doc/Zoltan_html/dev_html/dev_parmetis.html \
    doc/Zoltan_html/dev_html/dev_phg.html \
    doc/Zoltan_html/dev_html/dev_rcb.html \
    doc/Zoltan_html/dev_html/dev_refs.html \
    doc/Zoltan_html/dev_html/dev_reftree.html \
    doc/Zoltan_html/dev_html/dev_rib.html \
    doc/Zoltan_html/dev_html/dev_services.html \
    doc/Zoltan_html/dev_html/dev_services_debug.html \
    doc/Zoltan_html/dev_html/dev_services_hash.html \
    doc/Zoltan_html/dev_html/dev_services_objlist.html \
    doc/Zoltan_html/dev_html/dev_services_parallel.html \
    doc/Zoltan_html/dev_html/dev_services_params.html \
    doc/Zoltan_html/dev_html/dev_services_time.html \
    doc/Zoltan_html/dev_html/dev_services_zoltantimer.html \
    doc/Zoltan_html/dev_html/dev_test_script.html \
    doc/Zoltan_html/dev_html/dev_view.html \
    doc/Zoltan_html/dev_html/film2d.png \
    doc/Zoltan_html/dev_html/hammondMesh.png \
    doc/Zoltan_html/dev_html/hammondPoints.png \
    doc/Zoltan_html/dev_html/zdrive.inp \
    doc/Zoltan_html/ug_html/figures/arrow.gif \
    doc/Zoltan_html/ug_html/figures/HGFigure.gif \
    doc/Zoltan_html/ug_html/figures/hierexample.fig \
    doc/Zoltan_html/ug_html/figures/hierexample.gif \
    doc/Zoltan_html/ug_html/figures/Z.gif \
    doc/Zoltan_html/ug_html/ug.html \
    doc/Zoltan_html/ug_html/ug_alg.html \
    doc/Zoltan_html/ug_html/ug_alg_block.html \
    doc/Zoltan_html/ug_html/ug_alg_geom.html \
    doc/Zoltan_html/ug_html/ug_alg_graph.html \
    doc/Zoltan_html/ug_html/ug_alg_hier.html \
    doc/Zoltan_html/ug_html/ug_alg_hsfc.html \
    doc/Zoltan_html/ug_html/ug_alg_hypergraph.html \
    doc/Zoltan_html/ug_html/ug_alg_jostle.html \
    doc/Zoltan_html/ug_html/ug_alg_oct.html \
    doc/Zoltan_html/ug_html/ug_alg_parkway.html \
    doc/Zoltan_html/ug_html/ug_alg_parmetis.html \
    doc/Zoltan_html/ug_html/ug_alg_patoh.html \
    doc/Zoltan_html/ug_html/ug_alg_phg.html \
    doc/Zoltan_html/ug_html/ug_alg_ptscotch.html \
    doc/Zoltan_html/ug_html/ug_alg_random.html \
    doc/Zoltan_html/ug_html/ug_alg_rcb.html \
    doc/Zoltan_html/ug_html/ug_alg_reftree.html \
    doc/Zoltan_html/ug_html/ug_alg_rib.html \
    doc/Zoltan_html/ug_html/ug_alg_simple.html \
    doc/Zoltan_html/ug_html/ug_backward.html \
    doc/Zoltan_html/ug_html/ug_color.html \
    doc/Zoltan_html/ug_html/ug_color_parallel.html \
    doc/Zoltan_html/ug_html/ug_cpp.html \
    doc/Zoltan_html/ug_html/ug_examples.html \
    doc/Zoltan_html/ug_html/ug_examples_init.html \
    doc/Zoltan_html/ug_html/ug_examples_lb.html \
    doc/Zoltan_html/ug_html/ug_examples_mig.html \
    doc/Zoltan_html/ug_html/ug_examples_query.html \
    doc/Zoltan_html/ug_html/ug_fortran.html \
    doc/Zoltan_html/ug_html/ug_graph_vs_hg.html \
    doc/Zoltan_html/ug_html/ug_index.html \
    doc/Zoltan_html/ug_html/ug_interface.html \
    doc/Zoltan_html/ug_html/ug_interface_augment.html \
    doc/Zoltan_html/ug_html/ug_interface_color.html \
    doc/Zoltan_html/ug_html/ug_interface_init.html \
    doc/Zoltan_html/ug_html/ug_interface_lb.html \
    doc/Zoltan_html/ug_html/ug_interface_mig.html \
    doc/Zoltan_html/ug_html/ug_interface_order.html \
    doc/Zoltan_html/ug_html/ug_intro.html \
    doc/Zoltan_html/ug_html/ug_order.html \
    doc/Zoltan_html/ug_html/ug_order_parmetis.html \
    doc/Zoltan_html/ug_html/ug_order_ptscotch.html \
    doc/Zoltan_html/ug_html/ug_param.html \
    doc/Zoltan_html/ug_html/ug_query.html \
    doc/Zoltan_html/ug_html/ug_query_lb.html \
    doc/Zoltan_html/ug_html/ug_query_mig.html \
    doc/Zoltan_html/ug_html/ug_refs.html \
    doc/Zoltan_html/ug_html/ug_release.html \
    doc/Zoltan_html/ug_html/ug_usage.html \
    doc/Zoltan_html/ug_html/ug_util.html \
    doc/Zoltan_html/ug_html/ug_util_comm.html \
    doc/Zoltan_html/ug_html/ug_util_dd.html \
    doc/Zoltan_html/ug_html/ug_util_mem.html

ZOLTAN_SAMPLE = \
       SampleConfigurationScripts/mac_osX_no_fortran \
       SampleConfigurationScripts/linux_with_purify_zoltan_only \
       SampleConfigurationScripts/mac_osX_zoltan_only \
       SampleConfigurationScripts/linux_zoltan_only \
       SampleConfigurationScripts/linux_trilinos_runtests        \
       SampleConfigurationScripts/linux_zoltan_dist  \
       SampleConfigurationScripts/mac_osX_zoltan_dist

ZOLTAN_CMAKE = \
       CMakeLists.txt \
       src/CMakeLists.txt \
       src/driver/CMakeLists.txt \
       src/fdriver/CMakeLists.txt \
       test/CMakeLists.txt \
       test/ch_simple/CMakeLists.txt \
       test/hg_simple/CMakeLists.txt \
       cmake/Dependencies.cmake  \
       cmake/Zoltan_config.h.in

EXTRA_DIST = config/generate-makeoptions.pl \
       README.html README.txt \
       config/strip_dup_incl_paths.pl config/strip_dup_libs.pl \
       config/replace-install-prefix.pl config/string-replace.pl \
       config/token-replace.pl \
       Disclaimer GNU_Lesser_GPL.txt Known_Problems VERSION \
       $(ZOLTAN_DOCS) $(ZOLTAN_SAMPLE) $(ZOLTAN_TESTS)

AUX_DIST = config/install-sh config/missing config/mkinstalldirs
MAINTAINERCLEANFILES = Makefile.in aclocal.m4 autom4te.cache/* \
	configure config.status config.log \
	src/common/config-h.in src/common/stamp-h.in \
	$(AUX_DIST)


#We now build tests and examples through separate make targets, rather than
#during "make".  We still need to conditionally include the test and example
#in SUBDIRS, even though BUILD_TESTS and BUILD_EXAMPLES will never be
#defined, so that the tests and examples are included in the distribution
#tarball.

#Add this later
@SUB_TEST_TRUE@TEST_SUBDIR =
@SUB_EXAMPLE_TRUE@EXAMPLE_SUBDIR = example
@HAVE_MPI_FALSE@SIMPI_SUBDIR = siMPI
@HAVE_MPI_TRUE@SIMPI_SUBDIR =
SUBDIRS = $(SIMPI_SUBDIR) src $(EXAMPLE_SUBDIR) $(TEST_SUBDIR)
TRILINOS_HOME_DIR = @abs_top_srcdir@/../..
TRILINOS_BUILD_DIR = @abs_top_builddir@/../..
TRILINOS_MPI_MAX_PROC = 4
TRILINOS_TEST_CATEGORY = INSTALL
all: all-recursive

.SUFFIXES:
am--refresh: Makefile
	@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):

src/include/Zoltan_config.h: src/include/stamp-h1
	@if test ! -f $@; then rm -f src/include/stamp-h1; else :; fi
	@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) src/include/stamp-h1; else :; fi

src/include/stamp-h1: $(top_srcdir)/src/include/Zoltan_config.h.in $(top_builddir)/config.status
	@rm -f src/include/stamp-h1
	cd $(top_builddir) && $(SHELL) ./config.status src/include/Zoltan_config.h
$(top_srcdir)/src/include/Zoltan_config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
	rm -f src/include/stamp-h1
	touch $@

distclean-hdr:
	-rm -f src/include/Zoltan_config.h src/include/stamp-h1
Makefile.export.zoltan: $(top_builddir)/config.status $(srcdir)/Makefile.export.zoltan.in
	cd $(top_builddir) && $(SHELL) ./config.status $@

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	$(am__remove_distdir)
	test -d "$(distdir)" || mkdir "$(distdir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(MKDIR_P) "$(distdir)/$$subdir" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	-test -n "$(am__skip_mode_fix)" \
	|| find "$(distdir)" -type d ! -perm -755 \
		-exec chmod u+rwx,go+rx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)

dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
	$(am__remove_distdir)

dist-lzip: distdir
	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
	$(am__remove_distdir)

dist-lzma: distdir
	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
	$(am__remove_distdir)

dist-xz: distdir
	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
	$(am__remove_distdir)

dist-tarZ: distdir
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__remove_distdir)

dist-shar: distdir
	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
	$(am__remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__remove_distdir)

dist dist-all: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.lzma*) \
	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
	*.tar.lz*) \
	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
	*.tar.xz*) \
	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	esac
	chmod -R a-w $(distdir); chmod a+w $(distdir)
	mkdir $(distdir)/_build
	mkdir $(distdir)/_inst
	chmod a-w $(distdir)
	test -d $(distdir)/_build || exit 0; \
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && am__cwd=`pwd` \
	  && $(am__cd) $(distdir)/_build \
	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
	  && cd "$$am__cwd" \
	  || exit 1
	$(am__remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
	@test -n '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: trying to run $@ with an empty' \
	       '$$(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	$(am__cd) '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile all-local
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-recursive

clean-am: clean-generic mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am:

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am:
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-exec-hook
install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am:
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) uninstall-hook
.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
	install-am install-exec-am install-strip tags-recursive \
	uninstall-am

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am all-local am--refresh check check-am clean \
	clean-generic ctags ctags-recursive dist dist-all dist-bzip2 \
	dist-gzip dist-lzip dist-lzma dist-shar dist-tarZ dist-xz \
	dist-zip distcheck distclean distclean-generic distclean-hdr \
	distclean-tags distcleancheck distdir distuninstallcheck dvi \
	dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-dvi install-dvi-am \
	install-exec install-exec-am install-exec-hook install-html \
	install-html-am install-info install-info-am install-man \
	install-pdf install-pdf-am install-ps install-ps-am \
	install-strip installcheck installcheck-am installdirs \
	installdirs-am maintainer-clean maintainer-clean-generic \
	mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \
	tags-recursive uninstall uninstall-am uninstall-hook


#The following line helps the test harness recover from build errors.

all-local:
	@echo ""
	@echo "Trilinos package zoltan built successfully."
	@echo ""

@BUILD_TESTS_TRUE@tests: examples
@BUILD_TESTS_TRUE@	@echo ""
@BUILD_TESTS_TRUE@	@echo "Now building zoltan tests."
@BUILD_TESTS_TRUE@	@echo ""
@BUILD_TESTS_TRUE@	@echo "Zoltan tests use drivers and input files; no compilation necessary."
@BUILD_TESTS_TRUE@	@echo ""
@BUILD_TESTS_TRUE@	@echo "Finished building zoltan tests."
@BUILD_TESTS_TRUE@	@echo ""
@BUILD_TESTS_FALSE@tests:
@BUILD_TESTS_FALSE@	@echo "zoltan tests were disabled at configure time"

@BUILD_EXAMPLES_TRUE@examples:
@BUILD_EXAMPLES_TRUE@	@echo ""
@BUILD_EXAMPLES_TRUE@	@echo "Now building zoltan examples."
@BUILD_EXAMPLES_TRUE@	@echo ""
@BUILD_EXAMPLES_TRUE@	cd $(top_builddir)/example && $(MAKE)
@BUILD_EXAMPLES_TRUE@	@echo ""
@BUILD_EXAMPLES_TRUE@	@echo "Finished building zoltan examples."
@BUILD_EXAMPLES_TRUE@	@echo ""

@BUILD_EXAMPLES_TRUE@install-examples:
@BUILD_EXAMPLES_TRUE@	cd $(top_builddir)/example && $(MAKE) install
@BUILD_EXAMPLES_FALSE@examples:
@BUILD_EXAMPLES_FALSE@	@echo "zoltan examples were disabled at configure time"

@BUILD_EXAMPLES_FALSE@install-examples:
@BUILD_EXAMPLES_FALSE@	@echo "zoltan examples were disabled at configure time"

clean-tests:
	cd $(top_builddir)/test && $(MAKE) clean

clean-examples:
	cd $(top_builddir)/example && $(MAKE) clean

everything:
	$(MAKE) && $(MAKE) examples && $(MAKE) tests

clean-everything:
	$(MAKE) clean-examples && $(MAKE) clean-tests && $(MAKE) clean

install-everything:
	$(MAKE) install && $(MAKE) install-examples

runtests-serial :
	$(PERL_EXE) $(TRILINOS_HOME_DIR)/commonTools/test/utilities/runtests \
  --trilinos-dir=$(TRILINOS_HOME_DIR) \
  --comm=serial \
  --build-dir=$(TRILINOS_BUILD_DIR) \
  --category=$(TRILINOS_TEST_CATEGORY) \
  --output-dir=@abs_top_builddir@/test/runtests-results \
  --verbosity=1 \
  --packages=zoltan

runtests-mpi :
	$(PERL_EXE) $(TRILINOS_HOME_DIR)/commonTools/test/utilities/runtests \
  --trilinos-dir=$(TRILINOS_HOME_DIR) \
  --comm=mpi \
  --mpi-go=$(TRILINOS_MPI_GO) \
  --build-dir=$(TRILINOS_BUILD_DIR) \
  --max-proc=$(TRILINOS_MPI_MAX_PROC) \
  --category=$(TRILINOS_TEST_CATEGORY) \
  --output-dir=@abs_top_builddir@/test/runtests-results \
  --verbosity=1 \
  --packages=zoltan

@USING_EXPORT_MAKEFILES_TRUE@install-exec-hook:
@USING_EXPORT_MAKEFILES_TRUE@	mkdir -p $(DESTDIR)$(includedir)
@USING_EXPORT_MAKEFILES_TRUE@	cp $(top_builddir)/Makefile.export.zoltan $(DESTDIR)$(includedir)/.
@USING_EXPORT_MAKEFILES_TRUE@	$(PERL_EXE) $(top_srcdir)/config/replace-install-prefix.pl \
@USING_EXPORT_MAKEFILES_TRUE@		--exec-prefix=$(exec_prefix) \
@USING_EXPORT_MAKEFILES_TRUE@		--my-export-makefile=Makefile.export.zoltan \
@USING_EXPORT_MAKEFILES_TRUE@		--my-abs-top-srcdir=@abs_top_srcdir@ \
@USING_EXPORT_MAKEFILES_TRUE@		--my-abs-incl-dirs=@abs_top_builddir@/src:@abs_top_srcdir@/src \
@USING_EXPORT_MAKEFILES_TRUE@		--my-abs-lib-dirs=@abs_top_builddir@/src
@USING_EXPORT_MAKEFILES_TRUE@	$(PERL_EXE) $(top_srcdir)/config/generate-makeoptions.pl $(top_builddir)/src/Makefile ZOLTAN > $(DESTDIR)$(includedir)/Makefile.export.zoltan.macros

@USING_EXPORT_MAKEFILES_TRUE@uninstall-hook:
@USING_EXPORT_MAKEFILES_TRUE@	rm -f $(includedir)/Makefile.export.zoltan
@USING_EXPORT_MAKEFILES_TRUE@	rm -f $(includedir)/Makefile.export.zoltan.macros

@USING_EXPORT_MAKEFILES_FALSE@install-exec-hook:

@USING_EXPORT_MAKEFILES_FALSE@uninstall-hook:

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: