/*=========================================================================

  Program:   Visualization Toolkit
  Module:    $RCSfile: vtkGenericAdaptorCell.cxx,v $

  Copyright (c) Ken Martin, Will Schroeder, Bill Lorensen
  All rights reserved.
  See Copyright.txt or http://www.kitware.com/Copyright.htm for details.

     This software is distributed WITHOUT ANY WARRANTY; without even
     the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
     PURPOSE.  See the above copyright notice for more information.

=========================================================================*/
#include "vtkGenericAdaptorCell.h"

#include <assert.h>

#include "vtkPoints.h"
#include "vtkPointLocator.h"
#include "vtkTetra.h"
#include "vtkTriangle.h"
#include "vtkLine.h"
#include "vtkVertex.h"
#include "vtkPointData.h"
#include "vtkCellData.h"
#include "vtkDoubleArray.h"
#include "vtkCellArray.h"
#include "vtkContourValues.h"
#include "vtkImplicitFunction.h"
#include "vtkGenericAttributeCollection.h"
#include "vtkGenericAttribute.h"
#include "vtkGenericCellTessellator.h"
#include "vtkUnsignedCharArray.h"
#include "vtkQuad.h"
#include "vtkHexahedron.h"

vtkCxxRevisionMacro(vtkGenericAdaptorCell, "$Revision: 1.21 $");

vtkGenericAdaptorCell::vtkGenericAdaptorCell()
{
  this->Tetra = vtkTetra::New();
  this->Triangle = vtkTriangle::New();
  this->Line = vtkLine::New();
  this->Vertex = vtkVertex::New();
  this->Hexa=vtkHexahedron::New();
  this->Quad=vtkQuad::New();
  
  this->Scalars = vtkDoubleArray::New();
  this->Scalars->SetNumberOfTuples(4);
  this->PointData = vtkPointData::New();
  this->CellData = vtkCellData::New();
  

  // Internal array to avoid New/ Delete
  this->InternalPoints = vtkDoubleArray::New();
  this->InternalPoints->SetNumberOfComponents(3);
  this->InternalScalars = vtkDoubleArray::New();
  this->InternalCellArray = vtkCellArray::New();
  this->InternalIds = vtkIdList::New();

  this->PointDataScalars = vtkDoubleArray::New();
  this->PointData->SetScalars( this->PointDataScalars );
  this->PointDataScalars->Delete();
  
  this->Tuples=0;
  this->TuplesCapacity=0;
}

//----------------------------------------------------------------------------
vtkGenericAdaptorCell::~vtkGenericAdaptorCell()
{
  this->Tetra->Delete();
  this->Triangle->Delete();
  this->Line->Delete();
  this->Vertex->Delete();
  this->Hexa->Delete();
  this->Quad->Delete();
  
  this->Scalars->Delete();
  this->PointData->Delete();
  this->CellData->Delete();
  
  this->InternalPoints->Delete();
  this->InternalScalars->Delete();
  this->InternalCellArray->Delete();
  this->InternalIds->Delete();
  
  if(this->Tuples!=0)
    {
    delete[] this->Tuples;
    }
}

//----------------------------------------------------------------------------

void vtkGenericAdaptorCell::PrintSelf(ostream& os, vtkIndent indent)
{
  this->Superclass::PrintSelf(os,indent);
}
//----------------------------------------------------------------------------
// Description:
// Does the cell have no higher-order interpolation for geometry?
// \post definition: result==(GetGeometryOrder()==1)
int vtkGenericAdaptorCell::IsGeometryLinear()
{
  return this->GetGeometryOrder() == 1;
}

//----------------------------------------------------------------------------
// Description:
// Return the index of the first point centered attribute with the highest
// order in `ac'.
// \pre ac_exists: ac!=0
// \post valid_result: result>=-1 && result<ac->GetNumberOfAttributes()
int vtkGenericAdaptorCell::GetHighestOrderAttribute(vtkGenericAttributeCollection *ac)
{
  assert("pre: ac_exists" && ac!=0);
  int result=-1;
  int highestOrder=-1;
  int order;
  vtkGenericAttribute *a;
  int c = ac->GetNumberOfAttributes();
  int i=0;
  while(i<c)
    {
    a=ac->GetAttribute(i);
    if(a->GetCentering()==vtkPointCentered)
      {
      order=this->GetAttributeOrder(a);
      if(order>highestOrder)
        {
        highestOrder=order;
        result=i;
        }
      }
    ++i;
    }
  assert("post: valid_result" && result>=-1 && result<ac->GetNumberOfAttributes());
  return result;
}

//----------------------------------------------------------------------------
// Description:
// Does the attribute `a' have no higher-order interpolation for the cell?
// \pre a_exists: a!=0
// \post definition: result==(GetAttributeOrder()==1)
int vtkGenericAdaptorCell::IsAttributeLinear(vtkGenericAttribute *a)
{
  return this->GetAttributeOrder(a) == 1;
}

//----------------------------------------------------------------------------
void vtkGenericAdaptorCell::GetBounds(double bounds[6])
{
#if 0
  double x[3];
  int i, numPts=this->GetNumberOfPoints();

  if (numPts)
    {
    this->GetPoints()->GetPoint(0, x);
    bounds[0] = x[0];
    bounds[2] = x[1];
    bounds[4] = x[2];
    bounds[1] = x[0];
    bounds[3] = x[1];
    bounds[5] = x[2];
    for (i=1; i<numPts; i++)
      {
      this->GetPoints()->GetPoint(i, x);
      bounds[0] = (x[0] < bounds[0] ? x[0] : bounds[0]);
      bounds[1] = (x[0] > bounds[1] ? x[0] : bounds[1]);
      bounds[2] = (x[1] < bounds[2] ? x[1] : bounds[2]);
      bounds[3] = (x[1] > bounds[3] ? x[1] : bounds[3]);
      bounds[4] = (x[2] < bounds[4] ? x[2] : bounds[4]);
      bounds[5] = (x[2] > bounds[5] ? x[2] : bounds[5]);
      }
    }
#endif
  memset(bounds,0,sizeof(double));
  vtkErrorMacro("TO BE DONE");
}

//----------------------------------------------------------------------------
double *vtkGenericAdaptorCell::GetBounds()
{
  this->GetBounds(this->Bounds);
  
  return this->Bounds;
}

//----------------------------------------------------------------------------
// Description:
// Return the bounding box diagonal squared of the current cell.
// \post positive_result: result>=0
double vtkGenericAdaptorCell::GetLength2()
{
  double diff, l=0.0;
  int i;

  this->GetBounds(this->Bounds);
  for (i=0; i<3; i++)
    {
    diff = this->Bounds[2*i+1] - this->Bounds[2*i];
    l += diff * diff;
    }
  return l;
}

//----------------------------------------------------------------------------
// Reset
void vtkGenericAdaptorCell::Reset()
{
  this->InternalPoints->Reset();
  this->InternalCellArray->Reset();
  this->InternalScalars->Reset();
}

//----------------------------------------------------------------------------
void vtkGenericAdaptorCell::Contour(vtkContourValues *contourValues, 
                                    vtkImplicitFunction *f,
                                    vtkGenericAttributeCollection *attributes,
                                    vtkGenericCellTessellator *tess,
                                    vtkPointLocator *locator, 
                                    vtkCellArray *verts,
                                    vtkCellArray *lines,
                                    vtkCellArray *polys,
                                    vtkPointData *outPd,
                                    vtkCellData *outCd,
                                    vtkPointData *internalPd,
                                    vtkPointData *secondaryPd,
                                    vtkCellData *secondaryCd)
{
  assert("pre: values_exist" && ((contourValues!=0 && f==0) || (contourValues!=0 && f!=0)));
  assert("pre: attributes_exist" && attributes!=0);
  assert("pre: tessellator_exists" && tess!=0);
  assert("pre: locator_exists" && locator!=0);
  assert("pre: verts_exist" && verts!=0);
  assert("pre: lines_exist" && lines!=0);
  assert("pre: polys_exist" && polys!=0);
  assert("pre: internalPd_exists" && internalPd!=0);
  assert("pre: secondaryPd_exists" && secondaryPd!=0);
  assert("pre: secondaryCd_exists" && secondaryCd!=0);
  
  int i;
  int j;
  int c;
  double range[2];
  double contVal=-1000;
  double *values;
  
  vtkCell *linearCell;
  vtkIdType ptsCount;
 
  this->Reset();
  
  // for each cell-centered attribute: copy the value in the secondary
  // cell data.
  secondaryCd->Reset();
  int attrib=0;
  while(attrib<attributes->GetNumberOfAttributes())
    {
    if(attributes->GetAttribute(attrib)->GetCentering()==vtkCellCentered)
      {
      vtkDataArray *array = secondaryCd->GetArray(attributes->GetAttribute(attrib)->GetName());
      values = attributes->GetAttribute(attrib)->GetTuple(this);
      array->InsertNextTuple(values);
      }
    attrib++;
    }
  
  int attribute = this->GetHighestOrderAttribute(attributes);
  if(this->IsGeometryLinear() &&(attribute==-1 || this->IsAttributeLinear(attributes->GetAttribute(attribute))))
    {
    // linear case
    switch(this->GetType())
      {
      case VTK_HIGHER_ORDER_TRIANGLE:
        linearCell=this->Triangle;
        ptsCount=3;
        break;
      case VTK_HIGHER_ORDER_QUAD:
        linearCell=this->Quad;
        ptsCount=4;
        break;
      case VTK_HIGHER_ORDER_TETRAHEDRON:
        linearCell=this->Tetra;
        ptsCount=4;
        break;
      case VTK_HIGHER_ORDER_HEXAHEDRON:
        linearCell=this->Hexa;
        ptsCount=8;
        break;
      default:
        assert("check: impossible case" && 0);
        linearCell=0; // just to fix warning of some compilers
        ptsCount=0; // just to fix warning of some compilers
        break;
      }
    int currComp=attributes->GetActiveComponent();
    
    double *locals=this->GetParametricCoords();
    double point[3];
    
    vtkGenericAttribute *a;
    int count = attributes->GetNumberOfAttributes();
    int attribute_idx;
    
    values = contourValues->GetValues();
    int numContours = contourValues->GetNumberOfContours();
    
    this->AllocateTuples(attributes->GetMaxNumberOfComponents());
    
    int activeAttributeIdx = attributes->GetActiveAttribute();
    
    // build the cell
    i=0;
    while(i<ptsCount)
      {
      this->EvaluateLocation(0,locals,point);
      linearCell->PointIds->SetId(i, i);
      linearCell->Points->SetPoint(i, point );
      
      // for each point-centered attribute
      secondaryPd->Reset();
      attribute_idx=0;
      j=0;
      while(attribute_idx<count)
        {
        a = attributes->GetAttribute(attribute_idx);
        if(a->GetCentering()==vtkPointCentered)
          {
          this->InterpolateTuple(a,locals,this->Tuples);
          secondaryPd->GetArray(j)->InsertTuple(i,this->Tuples);
          if(attribute_idx==activeAttributeIdx)
            {
            if(f==0)
              {
              contVal = this->Tuples[currComp];
              }
            }
          ++j;
          }
        ++attribute_idx;
        }
      
      if(f)
        {
        contVal = f->FunctionValue( point );
        }
      this->Scalars->SetTuple1( i, contVal ); // value at point i of the
      // current linear cell.
      if(i==0)
        {
          range[0]=range[1]=contVal;
        }
      else
        {
        range[0] = range[0] < contVal ? range[0] : contVal;
        range[1] = range[1] > contVal ? range[1] : contVal;
        }
      
      ++i;
      locals=locals+3;
      }
     
    // call contour on each value
    for( int vv = 0; vv < numContours; vv++ )
      {
      if(values[vv] >= range[0] && values[vv] <= range[1])
        {
        linearCell->Contour(values[vv],this->Scalars,locator,verts,lines,
                            polys,secondaryPd, outPd, secondaryCd,
                            0, outCd);
        }
      }
    
    return;
    }
  // not linear case
  internalPd->Reset();
  
  switch(this->GetDimension())
    {
    case 3:
      tess->Tessellate(this, attributes, this->InternalPoints,
                       this->InternalCellArray, internalPd);
      linearCell=this->Tetra;
      ptsCount=4;
      break;
    case 2:
      tess->Triangulate(this, attributes, this->InternalPoints,
                        this->InternalCellArray, internalPd);
      linearCell=this->Triangle;
      ptsCount=3;
      break;
    default:
      linearCell=0;
      ptsCount=0;
      assert("TODO: dimension 1 and 0" && 0);
    }
    
  vtkIdType npts, *pts = 0;
  double *point = this->InternalPoints->GetPointer(0);

  vtkDataArray *scalars = internalPd->GetArray(attributes->GetActiveAttribute());
  int currComp = attributes->GetActiveComponent();
 
  values = contourValues->GetValues();
  int numContours = contourValues->GetNumberOfContours();
 
  c = internalPd->GetNumberOfArrays();
  int dataIndex=0;
  
  // for each linear sub-tetra, Build it and its pointdata
  // then contour it.
  for(this->InternalCellArray->InitTraversal(); 
      this->InternalCellArray->GetNextCell(npts, pts);)
    {
    assert("check: valid number of points" && npts == ptsCount);
    range[1] = range[0] = scalars->GetComponent(dataIndex,currComp);
    for(i=0; i<ptsCount; i++, point+=3)
      {
      linearCell->PointIds->SetId(i, pts[i]);
      linearCell->Points->SetPoint(i, point );
      if(f)
        {
        contVal = f->FunctionValue( point );
        }
      else
        {
        contVal = scalars->GetComponent(dataIndex,currComp);
        }
      this->Scalars->SetTuple1( i, contVal ); // value at point i of the
      // current linear simplex.
      
      range[0] = range[0] < contVal ? range[0] : contVal;
      range[1] = range[1] > contVal ? range[1] : contVal;   
      // for each point-centered attribute
      secondaryPd->Reset();
      j=0;
      while(j<c)
        {
        secondaryPd->GetArray(j)->InsertTuple(pts[i],
                                              internalPd->GetArray(j)->GetTuple(dataIndex));
        ++j;
        }
      ++dataIndex;
      
      }
    for( int vv = 0; vv < numContours; vv++ )
      {
      if(values[vv] >= range[0] && values[vv] <= range[1])
        {
        linearCell->Contour(values[vv],this->Scalars,locator,verts,lines,
                            polys,secondaryPd, outPd, secondaryCd,
                            0, outCd);
        }
      }
    }
}

//----------------------------------------------------------------------------
void vtkGenericAdaptorCell::Clip(double value, 
                                 vtkImplicitFunction *f,
                                 vtkGenericAttributeCollection *attributes,
                                 vtkGenericCellTessellator *tess,
                                 int insideOut,
                                 vtkPointLocator *locator, 
                                 vtkCellArray *connectivity,
                                 vtkPointData *outPd,
                                 vtkCellData *outCd,
                                 vtkPointData *internalPd,
                                 vtkPointData *secondaryPd,
                                 vtkCellData *secondaryCd)
{
  assert("pre: attributes_exist" && attributes!=0);
  assert("pre: tessellator_exists" && tess!=0);
  assert("pre: locator_exists" && locator!=0);
  assert("pre: connectivity_exist" && connectivity!=0);
  assert("pre: internalPd_exists" && internalPd!=0);
  assert("pre: secondaryPd_exists" && secondaryPd!=0);
  assert("pre: secondaryCd_exists" && secondaryCd!=0);
  
  int i;
  int j;
  int c;
  double contVal=-1000;
  double *values;
  
  vtkCell *linearCell;
  vtkIdType ptsCount;
 
  this->Reset();
  
  // for each cell-centered attribute: copy the value in the secondary
  // cell data.
  secondaryCd->Reset();
  int attrib=0;
  while(attrib<attributes->GetNumberOfAttributes())
    {
    if(attributes->GetAttribute(attrib)->GetCentering()==vtkCellCentered)
      {
      vtkDataArray *array=secondaryCd->GetArray(attributes->GetAttribute(attrib)->GetName());
      values=attributes->GetAttribute(attrib)->GetTuple(this);
      array->InsertNextTuple(values);
      }
    attrib++;
    }
  
   int attribute=this->GetHighestOrderAttribute(attributes);
  if(this->IsGeometryLinear() &&(attribute==-1 || this->IsAttributeLinear(attributes->GetAttribute(attribute))))
    {
    // linear case
    switch(this->GetType())
      {
      case VTK_HIGHER_ORDER_TRIANGLE:
        linearCell=this->Triangle;
        ptsCount=3;
        break;
      case VTK_HIGHER_ORDER_QUAD:
        linearCell=this->Quad;
        ptsCount=4;
        break;
      case VTK_HIGHER_ORDER_TETRAHEDRON:
        linearCell=this->Tetra;
        ptsCount=4;
        break;
      case VTK_HIGHER_ORDER_HEXAHEDRON:
        linearCell=this->Hexa;
        ptsCount=8;
        break;
      default:
        assert("check: impossible case" && 0);
        linearCell=0; // just to fix warning of some compilers
        ptsCount=0;// just to fix warning of some compilers
        break;
      }
    int currComp=attributes->GetActiveComponent();
    
    double *locals=this->GetParametricCoords();
    double point[3];
    
    vtkGenericAttribute *a;
    int count = attributes->GetNumberOfAttributes();
    int attribute_idx;
    
    this->AllocateTuples(attributes->GetMaxNumberOfComponents());
    
    int activeAttributeIdx=attributes->GetActiveAttribute();
    
    // build the cell
    i=0;
    while(i<ptsCount)
      {
      this->EvaluateLocation(0,locals,point);
      linearCell->PointIds->SetId(i, i);
      linearCell->Points->SetPoint(i, point );
      
      // for each point-centered attribute
      secondaryPd->Reset();
      attribute_idx=0;
      j=0;
      while(attribute_idx<count)
        {
        a = attributes->GetAttribute(attribute_idx);
        if(a->GetCentering()==vtkPointCentered)
          {
          this->InterpolateTuple(a,locals,this->Tuples);
          secondaryPd->GetArray(j)->InsertTuple(i,this->Tuples);
          if(attribute_idx==activeAttributeIdx)
            {
            if(f==0)
              {
              contVal = this->Tuples[currComp];
              }
            }
          ++j;
          }
        ++attribute_idx;
        }
      
      if(f)
        {
        contVal = f->FunctionValue( point );
        }
      this->Scalars->SetTuple1( i, contVal ); // value at point i of the
      // current linear cell.
      
      ++i;
      locals=locals+3;
      }
     
    linearCell->Clip(value,this->Scalars,locator,connectivity, 
                     secondaryPd, outPd, secondaryCd, 0, outCd, 
                     insideOut);
    return;
    }
  
  // Not linear case
  internalPd->Reset();
  
  switch(this->GetDimension())
    {
    case 3:
      tess->Tessellate(this, attributes, this->InternalPoints,
                       this->InternalCellArray, internalPd);
      linearCell=this->Tetra;
      ptsCount=4;
      break;
    case 2:
      tess->Triangulate(this, attributes, this->InternalPoints,
                        this->InternalCellArray, internalPd);
      linearCell=this->Triangle;
      ptsCount=3;
      break;
    default:
      linearCell=0;
      ptsCount=0;
      assert("TODO: dimension 1 and 0" && 0);
    }
    
  vtkIdType npts, *pts = 0;
  double *point  = this->InternalPoints->GetPointer(0);
  
  vtkDataArray *scalars=internalPd->GetArray(attributes->GetActiveAttribute());
  int currComp=attributes->GetActiveComponent();
  
  c=internalPd->GetNumberOfArrays();
  int dataIndex=0;
  
  // for each linear sub-tetra, Build it and its pointdata
  // then contour it.
  for(this->InternalCellArray->InitTraversal(); 
      this->InternalCellArray->GetNextCell(npts, pts);)
    {
    assert("check: valid number of points" && npts == ptsCount);
    for(i=0; i<ptsCount; i++, point+=3)
      {
      linearCell->PointIds->SetId(i, pts[i]);
      linearCell->Points->SetPoint(i, point );
      if(f)
        {
        contVal = f->FunctionValue( point );
        }
      else
        {
        contVal = scalars->GetComponent(dataIndex,currComp);
        }
      this->Scalars->SetTuple1( i, contVal ); // value at point i of the
      // current linear simplex.
      
      // for each point-centered attribute
      secondaryPd->Reset();
      j=0;
      while(j<c)
        {
        secondaryPd->GetArray(j)->InsertTuple(pts[i],
                                              internalPd->GetArray(j)->GetTuple(dataIndex));
        ++j;
        }
      ++dataIndex;
      
      }
    linearCell->Clip(value,this->Scalars,locator,connectivity, 
                     secondaryPd, outPd, secondaryCd, 0, outCd, 
                     insideOut);
    }
}

//----------------------------------------------------------------------------
// Description:
// Tessellate the cell if it is not linear or if at least one attribute of
// `attributes' is not linear. The output are linear cells of the same
// dimension than than cell. If the cell is linear and all attributes are
// linear, the output is just a copy of the current cell.
// `points', `cellArray', `pd' and `cd' are cumulative output data arrays
// over cell iterations: they store the result of each call to Tessellate().
// If it is not null, `types' is fill with the types of the linear cells.
// `types' is null when it is called from vtkGenericGeometryFilter and not
// null when it is called from vtkGenericDatasetTessellator.
// \pre attributes_exist: attributes!=0
// \pre points_exist: points!=0
// \pre cellArray_exists: cellArray!=0
// // \pre scalars_exists: scalars!=0
// \pre pd_exist: pd!=0
// \pre cd_exists: cd!=0
void vtkGenericAdaptorCell::Tessellate(vtkGenericAttributeCollection *attributes, 
                                       vtkGenericCellTessellator *tess,
                                       vtkPoints *points,
                                       vtkPointLocator *locator,
                                       vtkCellArray *cellArray,
                                       vtkPointData *internalPd,
                                       vtkPointData *pd,
                                       vtkCellData *cd,
                                       vtkUnsignedCharArray *types)
{
  assert("pre: attributes_exist" && attributes!=0);
  assert("pre: tessellator_exists" && tess!=0);
  assert("pre: points_exist" && points!=0);
  assert("pre: cellArray_exists" && cellArray!=0);
  assert("pre: internalPd_exists" && internalPd!=0);
  assert("pre: pd_exist" && pd!=0);
  assert("pre: cd_exist" && cd!=0);
  
  int i;
  int j;
#ifndef NDEBUG
  vtkIdType valid_npts=0; // for the check assertion
#endif
  int linearCellType;
  this->Reset();

  assert("check: TODO: Tessellate only works with 2D and 3D cells" && this->GetDimension() == 3 ||  this->GetDimension() == 2);
  
  int attribute=this->GetHighestOrderAttribute(attributes);
  if(this->IsGeometryLinear() &&(attribute==-1 || this->IsAttributeLinear(attributes->GetAttribute(attribute))))
    {
    // linear case
    this->AllocateTuples(attributes->GetMaxNumberOfComponents());
    
    // for each cell-centered attribute: copy the value
    int attrib=0;
    while(attrib<attributes->GetNumberOfAttributes())
      {
      if(attributes->GetAttribute(attrib)->GetCentering()==vtkCellCentered)
        {
        vtkDataArray *array=cd->GetArray(attributes->GetAttribute(attrib)->GetName());
        double *values=attributes->GetAttribute(attrib)->GetTuple(this);
        array->InsertNextTuple(values);  
        }
      attrib++;
      }
    int numVerts;
    
    switch(this->GetType())
      {
      case VTK_HIGHER_ORDER_TRIANGLE:
        linearCellType=VTK_TRIANGLE;
        numVerts=3;
        break;
      case VTK_HIGHER_ORDER_QUAD:
        linearCellType=VTK_QUAD;
        numVerts=4;
        break;
      case VTK_HIGHER_ORDER_TETRAHEDRON:
        linearCellType=VTK_TETRA;
        numVerts=4;
        break;
      case VTK_HIGHER_ORDER_HEXAHEDRON:
        linearCellType=VTK_HEXAHEDRON;
        numVerts=8;
        break;
      default:
        assert("check: impossible case" && 0);
        linearCellType=0; // just to fix warning of some compilers
        numVerts=0; // just to fix warning of some compilers
        break;
      }
    double *locals=this->GetParametricCoords();
    this->InternalIds->Reset();
    double point[3];
    vtkIdType ptId;
    i=0;
    
    vtkGenericAttribute *a;
    int count = attributes->GetNumberOfAttributes();
    int attribute_idx;
    int newpoint=1;
    
    while(i<numVerts)
      {
      this->EvaluateLocation(0,locals,point);
      if(locator==0) // no merging
        {
        ptId=points->InsertNextPoint(point );
        }
      else // merging
        {
        newpoint=locator->InsertUniquePoint(point,ptId);
        }
      this->InternalIds->InsertId(i,ptId);
      if(newpoint)
        {
        // for each point-centered attribute
        attribute_idx=0;
        j=0;
        while(attribute_idx<count)
          {
          a = attributes->GetAttribute(attribute_idx);
          if(a->GetCentering()==vtkPointCentered)
            {
            this->InterpolateTuple(a,locals,this->Tuples);
            pd->GetArray(j)->InsertTuple(ptId,this->Tuples);
            ++j;
            }
          ++attribute_idx;
          }
        }
      ++i;
      locals=locals+3;
      }
    
    cellArray->InsertNextCell(this->InternalIds );
    if(types!=0)
      {
      types->InsertNextValue(linearCellType);
      }
    }
  else // not linear
    {
    if( this->GetDimension() == 3)
      {
      internalPd->Reset();
      tess->Tessellate(this, attributes, this->InternalPoints, this->InternalCellArray, internalPd);
      linearCellType=VTK_TETRA;
#ifndef NDEBUG
      valid_npts=4;
#endif
      }
    else
      {
      if( this->GetDimension() == 2)
        {
        internalPd->Reset();
        tess->Triangulate(this, attributes, this->InternalPoints, this->InternalCellArray, internalPd);
        linearCellType=VTK_TRIANGLE;
#ifndef NDEBUG
        valid_npts=3;
#endif
        }
      else
        {
        linearCellType=0; // for compiler warning
        }
      }
    
    vtkIdType npts = 0;
    vtkIdType *pts = 0;
    double *point  = this->InternalPoints->GetPointer(0);
    
    
    // for each cell-centered attribute: copy the value
    int c=this->InternalCellArray->GetNumberOfCells();
    int attrib=0;
    while(attrib<attributes->GetNumberOfAttributes())
      {
      if(attributes->GetAttribute(attrib)->GetCentering()==vtkCellCentered)
        {
        vtkDataArray *array=cd->GetArray(attributes->GetAttribute(attrib)->GetName());
        double *values=attributes->GetAttribute(attrib)->GetTuple(this);
        i=0;
        while(i<c)
          {
          array->InsertNextTuple(values);
          ++i;
          }
        }
      attrib++;
      }
    
    c=internalPd->GetNumberOfArrays(); // same as pd->GetNumberOfArrays();
    
    int dataIndex=0;
    int newpoint=1;
    
    for(this->InternalCellArray->InitTraversal(); 
        this->InternalCellArray->GetNextCell(npts, pts);)
      {
      assert("check: is_a_simplex" && npts == valid_npts);
      this->InternalIds->Reset();
    
      for(i=0;i<npts;i++, point+=3)
        {
        vtkIdType ptId;
        if(locator==0) // no merging
          {
          ptId=points->InsertNextPoint(point );
          }
        else // merging
          {
          newpoint=locator->InsertUniquePoint(point,ptId);
          }
        this->InternalIds->InsertId(i,ptId);
        if(newpoint)
          {
          // for each point-centered attribute
          j=0;
          while(j<c)
            {
            pd->GetArray(j)->InsertTuple(ptId,
                                         internalPd->GetArray(j)->GetTuple(dataIndex));
            ++j;
            }
          }
        ++dataIndex;
        }
      cellArray->InsertNextCell(this->InternalIds );
      if(types!=0)
        {
        types->InsertNextValue(linearCellType);
        }
      }
    }
}

//----------------------------------------------------------------------------
void vtkGenericAdaptorCell::TriangulateFace(vtkGenericAttributeCollection *attributes,
                                            vtkGenericCellTessellator *tess,
                                            int index,
                                            vtkPoints *points,
                                            vtkPointLocator *locator,
                                            vtkCellArray *cellArray,
                                            vtkPointData *internalPd,
                                            vtkPointData *pd,
                                            vtkCellData *cd )
{
  assert("pre: cell_is_3d" && this->GetDimension()==3);
  assert("pre: attributes_exist" && attributes!=0);
  assert("pre: tessellator_exists" && tess!=0);
  assert("pre: valid_face" && index>=0 && index<this->GetNumberOfBoundaries(2));
  assert("pre: points_exist" && points!=0);
  assert("pre: cellArray_exists" && cellArray!=0);
  assert("pre: internalPd_exists" && internalPd!=0);
  assert("pre: pd_exist" && pd!=0);
  assert("pre: cd_exists" && cd!=0);
  
  int i;
  int j;
  int c;
  
  this->Reset();

  internalPd->Reset();
  
  // if simplex (tetra) just one sub-tetra [0,1,2,3]
  // otherwise build sub-tetra: HOW?
  
  int attribute=this->GetHighestOrderAttribute(attributes);
  if(this->IsGeometryLinear() &&(attribute==-1 || this->IsAttributeLinear(attributes->GetAttribute(attribute))))
    {
    // LINEAR CASE
    // the cell is linear both in geometry and attributes
    // just create a linear cell of the same type and return
    // the relevant face: basically, do what the Graphics/vtkGeometryFilter
    // do with the linear cells
    this->AllocateTuples(attributes->GetMaxNumberOfComponents());
    
    // for each cell-centered attribute: copy the value
    int attrib=0;
    while(attrib<attributes->GetNumberOfAttributes())
      {
      if(attributes->GetAttribute(attrib)->GetCentering()==vtkCellCentered)
        {
        vtkDataArray *array=cd->GetArray(attributes->GetAttribute(attrib)->GetName());
        double *values=attributes->GetAttribute(attrib)->GetTuple(this);
        array->InsertNextTuple(values);
        }
      attrib++;
      }
    vtkGenericAttribute *a;
    int count = attributes->GetNumberOfAttributes();
    
    int attribute_idx;
    
    this->InternalIds->Reset();
    int *faceVerts=this->GetFaceArray(index);
    int numVerts=this->GetNumberOfVerticesOnFace(index);
    double *locals=this->GetParametricCoords();
    double *local;
    double point[3];
    vtkIdType ptId;
    
    
    i=0;
    int newpoint=1;
    while(i<numVerts)
      {
      local=locals+3*faceVerts[i];
      this->EvaluateLocation(0,local,point);
      if(locator==0) // no merging
        {
        ptId=points->InsertNextPoint(point );
        }
      else // merging
        {
        newpoint=locator->InsertUniquePoint(point,ptId);
        }
      this->InternalIds->InsertId(i,ptId);
      if(newpoint)
        {
        // for each point-centered attribute
        attribute_idx=0;
        j=0;
        while(attribute_idx<count)
          {
          a = attributes->GetAttribute(attribute_idx);
          if(a->GetCentering()==vtkPointCentered)
            {
            this->InterpolateTuple(a,local,this->Tuples);
            pd->GetArray(j)->InsertTuple(ptId,this->Tuples);
            ++j;
            }
          ++attribute_idx;
          }
        }
      ++i;
      }
    cellArray->InsertNextCell(this->InternalIds );
    return;
    }
  
  // NOT LINEAR
  tess->TessellateFace(this, attributes,index,
                       this->InternalPoints,
                       this->InternalCellArray, internalPd);

  vtkIdType npts=0;
  vtkIdType *pts = 0;
  double *point = this->InternalPoints->GetPointer(0);
  
  // for each cell-centered attribute: copy the value
  c=this->InternalCellArray->GetNumberOfCells();
  int attrib=0;
  while(attrib<attributes->GetNumberOfAttributes())
    {
    if(attributes->GetAttribute(attrib)->GetCentering()==vtkCellCentered)
      {
      vtkDataArray *array=cd->GetArray(attributes->GetAttribute(attrib)->GetName());
      double *values=attributes->GetAttribute(attrib)->GetTuple(this);
      i=0;
      while(i<c)
        {
        array->InsertNextTuple(values);
        ++i;
        }
      }
    attrib++;
    }
  
  c=internalPd->GetNumberOfArrays();
  int dataIndex=0;
  
  int newpoint=1;
  
  for(this->InternalCellArray->InitTraversal(); 
      this->InternalCellArray->GetNextCell(npts, pts);)
    {
    assert("check: is_a_triangle" && npts == 3);
    this->InternalIds->Reset();
    
    for(i=0;i<npts;i++, point+=3)
      {
      vtkIdType ptId;
      if(locator==0) // no merging
        {
        ptId=points->InsertNextPoint(point );
        }
      else // merging
        {
        newpoint=locator->InsertUniquePoint(point,ptId);
        }
      this->InternalIds->InsertId(i,ptId);
      if(newpoint)
        {
        // for each point-centered attribute
        j=0;
        while(j<c)
          {
          pd->GetArray(j)->InsertTuple(ptId,
                                       internalPd->GetArray(j)->GetTuple(dataIndex));
          ++j;
          }
        }
      ++dataIndex;
      }
    cellArray->InsertNextCell(this->InternalIds );
    }
}

//----------------------------------------------------------------------------
// Description:
// Allocate some memory if Tuples does not exist or is smaller than size.
// \pre positive_size: size>0
void vtkGenericAdaptorCell::AllocateTuples(int size)
{
  assert("pre: positive_size" && size>0);
  
  if(this->TuplesCapacity<size)
    {
    if(this->Tuples!=0)
      {
      delete[] this->Tuples;
        }
    this->Tuples=new double[size];
    this->TuplesCapacity=size;
    }
}