6.7 KiB
\page polyhedra Polyhedral Element Support \section poly Storage of 3D arbitrary polyhedra elements in Exodus.
The 3D polyhedra elements are represented as elements with a variable number of faces in their connectivity. The faces can either be regular faces such as quadrilateral or triangles; or they can be topologically two-dimensional arbitrary polyhedra themselves.
An arbitrary polyhedra 3D element block will have an element type of "nfaced" or "NFACED".
The faces that are used in the connectivity of this block should be defined in one or more face blocks. If the faces are arbitrary polyhedra, then they will have a face type of "nsided" or "NSIDED".
An annotated example of defining an arbitrary polyhedral element block consisting of 3 elements is shown below.
The three elements have the following geometry:
- Element 1: 5 faces.
- Face 1: triangle with nodes 5, 6, 8
- Face 2: triangle with nodes 2, 1, 4
- Face 3: quadrilateral with nodes 6, 2, 4, 8
- Face 4: quadrilateral with nodes 8, 4, 1, 5
- Face 5: quadrilateral with nodes 1, 2, 6, 5
- Element 2: 5 faces.
- Face 6: triangle with nodes 5, 8, 7
- Face 7: triangle with nodes 1, 3, 4
- Face 8: quadrilateral with nodes 7, 8, 4, 3
- Face 9: quadrilateral with nodes 7, 3, 1, 5
- Face 4: quadrilateral with nodes 8, 4, 1, 5 (shared with element 1)
- Element 3: 7 faces.
- Face 8: quadrilateral with nodes 7, 8, 4, 3 (shared with element 2)
- Face 10: pentagonal with nodes 8, 4, 14, 10, 12
- Face 11: pentagonal with nodes 7, 11, 9, 13, 3
- Face 12: quadrilateral with nodes 7, 8, 12, 11
- Face 13: quadrilateral with nodes 11, 12, 10, 9
- Face 14: quadrilateral with nodes 9, 10, 14, 13
- Face 15: quadrilateral with nodes 12, 14, 4, 3
The Exodus model is created via the following calls:
- Output the initial information. Since the model contains faces and
a face block, the "extended" version of the
ex_put_init_ext()call must be used:
ex_init_params par;
ex_copy_string(par.title, "This is the title", MAX_LINE_LENGTH + 1);
par.num_dim = 3;
par.num_nodes = 14;
par.num_edge = 0;
par.num_edge_blk = 0;
par.num_face = 15;
par.num_face_blk = 1;
par.num_elem = 3;
par.num_elem_blk = 1;
par.num_node_sets = 0;
par.num_edge_sets = 0;
par.num_face_sets = 0;
par.num_side_sets = 0;
par.num_elem_sets = 0;
par.num_node_maps = 0;
par.num_edge_maps = 0;
par.num_face_maps = 0;
par.num_elem_maps = 0;
ex_put_init_ext (exoid, &par);
- Coordinate output is normal...
- Define the face block.
block_name = "face_block_1";
num_face_in_block[0] = 15;
num_total_nodes_per_blk[0] = 58;
block_id = 10;
ex_put_block (exoid, EX_FACE_BLOCK, block_id, "nsided",
num_face_in_block[0],
num_total_nodes_per_blk[0],
0, 0, 0);
ex_put_name(exoid, EX_FACE_BLOCK, block_id, block_name);
- Output the face connectivity for "face_block_1". The data for the face connectivity is listed above; a portion is shown below...
connect = (int *) calloc(num_total_nodes_per_blk[0], sizeof(int));
i = 0
connect[i++] = 5;
connect[i++] = 6;
connect[i++] = 8; /* connectivity of face 1 of element 1 */
connect[i++] = 2;
connect[i++] = 1;
connect[i++] = 4; /* face 2 of element 1 */
connect[i++] = 6;
connect[i++] = 2;
connect[i++] = 4;
connect[i++] = 8; /* face 3 of element 1 */
connect[i++] = 8;
connect[i++] = 4;
connect[i++] = 1;
connect[i++] = 5; /* face 4 of element 1 */
connect[i++] = 1;
connect[i++] = 2;
connect[i++] = 6;
connect[i++] = 5; /* face 5 of element 1 */
connect[i++] = 5;
connect[i++] = 8;
connect[i++] = 7; /* connectivity of face 1 of element 2 */
... and so on....
assert(i == num_total_nodes_per_blk[0]);
ex_put_conn (exoid, EX_FACE_BLOCK, block_id, connect, NULL, NULL);
- Output the number of nodes per face count for "face_block_1":
j = 0;
nnpe[ 1] = 3; /* Face 1 */
nnpe[ 2] = 3;
nnpe[ 3] = 4;
nnpe[ 4] = 4;
nnpe[ 5] = 4;
nnpe[ 6] = 3;
nnpe[ 7] = 3;
nnpe[ 8] = 4;
nnpe[ 9] = 4;
nnpe[10] = 5;
nnpe[11] = 5;
nnpe[12] = 4;
nnpe[13] = 4;
nnpe[14] = 4;
nnpe[15] = 4;
ex_put_entity_count_per_polyhedra(exoid, EX_FACE_BLOCK, block_id, nnpe);
- The face block is now fully defined; now define the nfaced element block which uses these faces.
block_name = "nfaced_1";
num_elem_in_block = 3;
num_total_faces_per_blk = 5 + 5 + 7;
block_id = 10;
ex_put_block (exoid, EX_ELEM_BLOCK, block_id, "nfaced",
num_elem_in_block,
0, /* nodes */
0, /* edges */
num_total_faces_per_blk,
0); /* attribute count */
ex_put_name(exoid, EX_ELEM_BLOCK, block_id, block_name);
In the ex_put_block() function, the element type is "nfaced". The
connectivity is defined in terms of the faces, so the node and edge
arguments are passed zeros. The nodal connectivity can be defined,
but it isn't required. The face connectivity argument for an
nfaced block is the total number of faces in the connectivity for all
elements in the nfaced block.
- Write the face connectivity:
/* write element-face connectivity */
connect = (int *) calloc(num_total_faces_per_blk, sizeof(int));
i = 0;
connect[i++] = 1;
connect[i++] = 2;
connect[i++] = 3;
connect[i++] = 4;
connect[i++] = 5;
connect[i++] = 4;
connect[i++] = 6;
connect[i++] = 7;
connect[i++] = 8;
connect[i++] = 9;
connect[i++] = 8;
connect[i++] = 10;
connect[i++] = 11;
connect[i++] = 12;
connect[i++] = 13;
connect[i++] = 14;
connect[i++] = 15;
assert(i == num_total_faces_per_blk);
ex_put_conn (exoid, EX_ELEM_BLOCK, block_id, NULL, NULL, connect);
- Output the number of faces per element count for "nfaced_1":
nnpe[1] = 5; /* Number of faces per element 1 */
nnpe[2] = 5; /* Number of faces per element 2 */
nnpe[3] = 7; /* Number of faces per element 3 */
ex_put_entity_count_per_polyhedra(exoid, EX_ELEM_BLOCK, block_id, nnpe);
-
That's all; the rest of the calls are the same as normal Exodus except:
-
There is a similar
ex_get_entity_count_per_polyhedra()function for read. -
The
ex_get_block()functions return the total number of nodes or faces for all faces or element for "nfaced" and "nsided" blocks and not the number per element -
An example read/write usage is shown in the testwt-nfaced.c and testrd-nfaced files.
-
These changes are in Exodus version v4.93 and later.